4 Most Common Swimming Pool Plumbing Problems & How to Prevent Them
RH Business Marketing Solutions
Whether you have a swimming pool in your own home or you are responsible for a commercial pool, plumbing problems can be a headache you could do without.
Sometimes, pool plumbing issues are easily rectified and don’t even require the assistance of a professional, whereas other complications need a little bit more time and money to fix.
Read on to discover four common pool plumbing issues, plus, how to prevent and fix them quickly and with minimal expense.
1. Pump problems
One of the most common issues for swimming pool owners is a problem with their system’s pump. Occasionally, air can get caught in your pool’s circulatory system, making it harder to move water. This, in turn, can cause the water in your pool to turn cloudy or dirty.
If left untreated, this problem will only get worse and could result in the pump overheating and bursting. Fortunately, if you have your pump looked at by a plumber as soon as you notice the issue, then you will not need to pay for a replacement.
2. Build up of dirt and debris
As you might suspect, a build-up of dirt and debris is not good for your pool’s plumbing system and can cause a whole host of problems. Most commonly, when dirt and debris enter your pool’s filtration system, clogs may form, which can prevent it from working properly.
You can avoid this issue by skimming your pool with a net daily to remove any debris and making sure pool users shower before swimming.
3. Pool leaks
Leaks are fairly common in swimming pools, causing highly inflated water bills and becoming increasingly costly to fix the longer they are left to their own devices.
If you suspect that your swimming pool may have a leak, then the sooner you have it looked at the better. Get in touch with a local plumber who specializes in pools as quickly as possible, as they will be able to determine what type of leak you have and how it can be fixed.
4. Filter pressure issues
There are two types of swimming pool filter problems: pressure rises and pressure drops. The former can be caused by algae blocking the filter, whereas the latter is likely to result from blocked suction lines or faulty equipment.
If your filter issues are caused by algae or blockage, these can be easily remedied. However, if the problem is faulty equipment, then you will likely need to invest in new pool supplies for your pool.
If you are in any doubt about what is wrong with your swimming pool or you are worried about a particular plumbing problem, it is always a good idea to get in touch with a professional plumber for advice. Although you may think it would be more cost-effective to try to resolve an issue yourself, this can prove to be a lot more expensive in the long run, especially if the issue is severe.