Google+

contact us

Use the form on the right to contact us.

Day or Night, we are here to serve you. Leave your plumbing problem to us.

 


Tinley Park, IL

(708)845-7922

Residential and Commercial plumbers and plumbing contractors available in Orland Park, Tinley Park, Oak Lawn, Palos Heights, Midlothian, Oak Forest, Homer Glen, Mokena, Frankfort, and the surrounding Chicago South Suburbs. Emergency plumbers.

Kevin Szabo Jr Plumbing Blog

Kevin Szabo Jr Plumbing is Tinley Park, Orland Park, Oak Forest, Midlothian, Orland Hill, Homer Glen, Mokena, Frankfort, Crestwood, Palos Heights, Oak Lawn, local plumber. Read our blog for advice, tips, a good laugh, and basic home improvement.

**We are moving our old blog to our new and improved website. Too see all our posts visit kevinszabojrplumbing.blogspot.com

10 Tips for Not Overrunning Your AC

RH Business Marketing Solutions

Introduction 

Keeping your air conditioner running efficiently doesn't have to be hard. If you follow a few basic tips and tricks, you can do a lot to prevent overrunning. Here are ten tips for not overrunning your AC. 

1. Clean the Filters 

Clearing out your AC's filters is important to ensure the system's efficiency. After a few months of use, your filter might get dirty and clogged with debris. This can cause the filter to stop working properly, which means that your system won't be able to cool you down as effectively. 

If you notice that your AC is running more slowly or isn't keeping the same temperature in your home, look inside the unit for any visible signs of filth. Cleaning the filters will help keep your house from getting too hot during summer. 

2. Turn It Off When Not Using 

You don't want to overuse your AC, and you'll save money on electricity if it's not running when you're not using it. You can turn it off when you leave the house or set a timer to shut it off after a certain amount. 

3. Use ceiling fans 

If you have an AC unit that runs 24/7, check the temperature of your house every hour or so. If it's too cold inside or too warm, turn on your AC fan and adjust the temperature until you find the sweet spot. You can also use ceiling fans to circulate cool air throughout your home at night when you're sleeping. 

4. Insulate your ductwork 

The most common cause of overheating in a house is using too much air conditioner for an inadequate home. Insulating your ductwork will help keep your AC from running too long. 

Insulation can be a great way to reduce your AC's energy consumption. Insulation is a way to reduce the amount of heat that is lost from your ductwork, keeping your AC working at full capacity. 

Keep in mind that insulation material must be applied over the ductwork. If you're insulating it, you may want to consider using an existing surface, such as tar paper or cardboard. 

5. Keep Your Room Shady 

Keeping your room shady is one of the best ways to keep your AC running at maximum efficiency. Anything that reduces the amount of sunlight entering your home will help keep your AC from overworking and causing damage to itself. 

6. Use a Smart Thermostat

A smart thermostat is a great way to keep your AC running at the right temperature, even when you're away from home. Smart thermostats can also help save energy by adjusting your AC as needed—they know when you're home and adjust accordingly. 

7. Keep the Room Tightly Closed 

The room should be tightly closed, and the door should be shut during the entire operation. 

Do not open the door more than once every 5 minutes. 

When you close the door and turn off the AC, ensure it is tightly closed. If it is not, then air will escape from inside the room. 

8. Clean the Vents of the Air Conditioner 

It's important to clean the vents of your air conditioner regularly to make sure that the air is cool and fresh. A clogged air conditioner can lead to many problems, including overheating and uncomfortable temperatures. You can use a small brush or something similar to clean these vents, but be careful not to damage them. 

9. Perform Regular Maintenance 

A common problem with ACs is that they can be prone to running too long. This can happen if you don't perform regular maintenance on your system. 

Regular maintenance is the most important thing you can do to keep your AC running smoothly. You should check the following: 

• Check the filters regularly and clean them if needed 

• Check for any leaks in your system 

• Check for damage to the unit itself 

10. Check the fan blade for wear and tear 

The fan blade will likely wear if your AC runs over its temperature. Check for wear and tear by turning the unit off. Next, remove the cover plate and look for obvious wear on the fan blades. If you find any problems, contact a technician immediately to have your unit repaired. 

The temperature one should set their thermostat during the day to conserve energy Most people set their thermostats to 75 degrees during the day, but that doesn't mean this energy-efficient temperature is right for you. 

How to check your FREON level 

FREON level checking is simple. With a simple meter, you can check your system to determine if it needs to be topped up or refilled. 

Conclusion 

So keep in mind, just like the brakes on your car, you will have to keep up with the maintenance on your HVAC system. This includes keeping your air filters cleaned out and having them

replaced on a regular schedule. Just as everyone likes to drive well-taken care of cars, it is easy to tell when a home or business isn't properly maintaining its HVAC system. So don't let yourself or your clients fall victim to this uncomfortable problem by maintaining your system. 

Written by Paige Shackelford, Digital PR Specialist for Open Sesame Garage Doors